Installation requirements
VM Explorer is composed by a software that has to be installed on a Windows Server 2008 R2 or more recent server (either virtual or physical). Other requirements are the same as the previous version, except having the .NET 6.4.2 package installed; support for 32-bit OS is over.

Once the installation is completed, start the program and select the Web Settings menu voice to set the admin password; you also need to set an IP address to access the Web interface: this release, as the previous 6.2 version, doesn’t feature the Windows client anymore.

1 vmexplorer webserver settings

Support to vSphere 6.5
The most important news of this release is the suporto to vSphere 6.5, the most recent version of the VMware product. Both ESXi 6.5 hypervisor (free version too, albeit only complete backups are available) and vCenter 6.5 are supported.
When adding an ESXi host, all VMs on the host are shown in the lateral dropdown menu: similarly, when adding a vCenter, hosts belonging to the cluster and related VMs are listed.

Again, if the VDDK service (Virtual Disk Development Kit the API set dedicated to storage management) is enabled in vCenter/ESXi host, then by default the system offers an Incremental backup to save time and resources. VD Services too are enabled by default if VDDK is ON. Those services allows to leverage the CBT -Changed Block Tracking- technology which speeds up backup execution. Be aware that these capabilities are not available with the free version of ESXi for the VADP API (vStorage APIs for Data PRotection) are blocked.

2 vmexplorer esxi 65 host

Exchange 2013/2016 file recovery
The second appealing news is the support to file-level recovery for Microsoft Exchange 2013 and 2016.
It’s an important addition as in most cases you need to restore a limited number of emails, and also because it optimizes resource usage not having to restore whole mailboxes anymore.

3 vmexplorer restore options

Other new features
A note-worthy feature is the introduction of S3-compatible Cloud Storage Targets, ie services which are based on the API set of AWS S3. To make a few examples, Google Cloud Storage, CloudStack, Ceph, Nimbula, Swift and Minio. Cloud storage destination are enriched thus offering different options for Cloud remote backup.

Good news for Linux users: support for EXT4 file system has been added. The advantages of EXT4 over other file systems like EXT3 are evident: max size (file system: 1 Exabyte, single file: 16 Terabytes), number of directories (64.000), features (journaling checksum, multi-block/delayed allocation, fast fsck, etc…) and performances. EXT3 file systems can be mounted as EXT4 without requiring an upgrade (and thus a reboot).

In VM Explorer 6.3 you can now schedule backup every 15 or 30 minutes, thus having less fragmented backups and creating a good Disaster Recovery; previously RTO was at least 60 minutes.

The list of new features ends with control to prevent Sweet32 attacks (related to the 3DES encryption algorithm) which exposes encrypted connections, and some minor bugfixes.

banner eng

fb icon evo twitter icon evo

Word of the Day

The term Edge Computing refers, when used in the cloud-based infrastructure sphere, the set of devices and technologies that allows...

>

The acronym SoC (System on Chip) describes particular integrated circuit that contain a whole system inside a single physical chip:...

>

The acronym PtP (Point-to-Point) indicates point-to-point radio links realized with wireless technologies. Differently, PtMP links connects a single source to...

>

Hold Down Timer is a technique used by network routers. When a node receives notification that another router is offline...

>

In the field of Information Technology, the term piggybacking refers to situations where an unauthorized third party gains access to...

>
Read also the others...

Download of the Day

Netcat

Netcat is a command line tool that can be used in both Linux and Windows environments, capable of...

>

Fiddler

Fiddler is a proxy server that can run locally to allow application debugging and control of data in...

>

Adapter Watch

Adapter Watch is a tool that shows a complete and detailed report about network cards. Download it here.

>

DNS DataView

DNS DataView is a graphical-interface software to perform DNS lookup queries from your PC using system-defined DNS, or...

>

SolarWinds Traceroute NG

SolarWinds Traceroute NG is a command line tool to perform advanced traceroute in Windows environment, compared to the...

>
All Download...

Issues Archive

  • GURU advisor: issue 18 - April 2018

    GURU advisor: issue 18 - April 2018

  • GURU advisor: issue 17 - January 2018

    GURU advisor: issue 17 - January 2018

  • GURU advisor: issue 16 - october 2017

    GURU advisor: issue 16 - october 2017

  • GURU advisor: issue 15 - July 2017

    GURU advisor: issue 15 - July 2017

  • GURU advisor: issue 14 - May 2017

    GURU advisor: issue 14 - May 2017

  • GURU advisor: issue 13 - March 2017

    GURU advisor: issue 13 - March 2017

  • GURU advisor: issue 12 -  January 2017

    GURU advisor: issue 12 - January 2017

  • GURU advisor: issue 11 -  October 2016

    GURU advisor: issue 11 - October 2016

  • 1
  • 2
  • 3
  • BYOD: your devices for your firm

    The quick evolution of informatics and technologies, together with the crisis that mined financial mines, has brought to a tendency inversion: users that prefer to work with their own devices as they’re often more advanced and modern than those the companies would provide. Read More
  • A switch for datacenters: Quanta LB4M

    You don’t always have to invest thousands of euros to build an enterprise-level networking: here’s our test of the Quanta LB4M switch Read More
  • Mobile World Congress in Barcelona

    GURU advisor will be at the Mobile World Congress in Barcelona from February 22nd to 25th 2016!

    MWC is one of the biggest conventions about the worldwide mobile market, we'll be present for the whole event and we'll keep you posted with news and previews from the congress.

    Read More
  • 1